Frequently Asked Questions

Roads naturally degrade over time due to traffic, weather, and environmental conditions. Repaving restores the road surface, ensuring safer and smoother travel.

Public Works selects roads for repaving based on pavement conditions, visual inspections, traffic volume analysis, budget constraints, and long-term planning goals.

Repaving typically takes about two weeks, one week involving preparation, concrete curb and sidewalk work, and another week for milling, inspections, repaving, and marking. Weather conditions may influence the timeline.

Water Main Work: 4-7 weeks

• Saw cutting the pavement: 1 day
• Excavation and Installation: 1 week for excavation, 1-3 weeks for new water main and valves installation
• Pressure Testing and Chlorination: Approximately 1 week
• New Water Services Installation: 1-2 weeks
• Abandonment of Old Water Mains: 1-2 days

Concrete Work: 7-10 days

• Saw Cutting the Concrete: 1 day
• Concrete Removal: 1-2 days
• Framing Sidewalks and Curbs: 1-2 days
• Pouring Concrete: 1 day
• Concrete Curing Process: 5 days

Road Resurfacing: 1-2 weeks

• Milling, Patching, Binder, Surface Course: Approximately 1-2 weeks

Site Restoration:

• Sod Installation: Approximately 1 week (Sod can only be placed after September when the daily temperatures drop below 80 degrees)

Note: Construction timelines may be delayed due to weather.

A water main is the principal pipeline that conveys clean, potable water from the pump house throughout the Village, connecting individual properties via smaller service lines. The Village maintains over 65 miles of water mains throughout the Village. 

Water mains are replaced based on age and condition. Over time, they can deteriorate, leading to structural weaknesses. Increased water demand may also require upgrading to larger pipes.

Water shutdowns occur when the new water main is being connected to the water system or when your service is switched from the old main to the new one.

Water shutdowns are anticipated to last no more than 6 hours, typically only a few hours. They usually occur between 9 am to 3 pm but can be extended for complicated installations. Shutdowns generally happen Monday through Thursday, except during emergencies. Service reconnections typically involve a 1-2 hour shutoff.

Yes, a member of the Village construction team will hand-deliver shutdown notices 24-48 hours in advance. However, there are instances where a water main breaks and an emergency shutdown is required. The Village does its best to notify the affected homes as soon as possible during a main break.

Water valves are critical in water distribution systems for:

• Control and Management: Valves allow precise control of water flow, enabling the isolation of specific sections for maintenance or emergencies without affecting the entire system.
• Maintenance and Repairs: Valves facilitate efficient repairs, minimizing service interruptions for residents.
• System Integrity: They help maintain water pressure and prevent leaks, ensuring consistent water flow to your home.

Concrete work is essential for repairing any damage caused by recent infrastructure projects. This includes fixing curbs, driveways, and sidewalks to ensure safety, functionality, and aesthetics.

Curbs are vital for safety and aesthetics. They direct stormwater to inlets, aid in drainage, guide snowplows, and enhance pedestrian safety by elevating walkways.

If your street is part of the yearly infrastructure program, the contractors may be preparing for work, such as saw-cutting pavement, which requires the street to be clear of cars. It is possible that the contractors may be using staging areas where heavy equipment, machinery, and materials are stored.

If your street is not on the yearly infrastructure program, it could mean that the Public Works Department needs greater access to the area.  Public Works may be preparing to trim or remove trees in the area or flush hydrants.  

There might be periods when you don't see workers on-site due to various factors, such as:

• Preparation/Testing Work: Some phases of construction, like material curing or waiting for tests to pass, don't require active labor.
• Weather Delays: Inclement weather can delay outdoor work, causing temporary pauses.
• Scheduling: Contractors may be coordinating with other crews or waiting for materials or equipment to arrive.
• Work Shifts: The construction schedule may include work during specific hours or days, so you might not see workers if they're not scheduled at that time.

If you ever have any questions about a project’s status, please call Public Works at 847-675-0888.